Local carriers in Saudi Arabia sometimes block standard OneSimCard outgoing calls. If this happens you need to either (a) enter a compatibility code into the settings of your phone or (b) initiate your call by sending an SMS message from the regular SMS menu (not the OneSimCard menu) of your phone.

How To Activate Compatibility Mode:

0. Open "OneSimCard" menu
0. Select "Settings"
0. Agree with message by pressing "Yes"
0. Dial digits "802" and select "OK" (screen will show message "output channel is SMS")

Bear in mind that if you have powered your telephone down and removed and reinstalled the battery, you will need to follow the programming steps outlined above again.

How To Deactivate Compatibility Mode:

0. Open "OneSimCard" menu
0. Select "Settings"
0. Agree with message by pressing "Yes"
0. Dial digits "801" and select "OK" (screen will show message "output channel is USSD")

How To Dial Without Activating Compatibility Mode:

Initiate your call by sending an SMS message from the regular SMS menu (not the OneSimCard menu) of your phone.

For example, to call from Saudi Arabia to Boston USA you should go to the SMS menu of the phone and send a message:

 

There are no special instructions to receive calls in these countries.

OneSimCard will work with almost any unlocked GSM tri-band or quad-band cell phone. A partial list of compatible cell phones that we have tested can be viewed here.

If you need to unlock the phone, we suggest contacting your carrier or phone manufacturer for unlocking information or services.

If your phone is not a quad-band phone, please make sure that the bands of your phone are those required in the country of your travel. You can look it up here.

If you are still unsure whether your cell phone is compatible, contact support or purchase an international cell phone and SIM card bundle from us, which all come preloaded with our international SIM card, $10 balance  and OneSimCard Apps Installed.

Sometimes when moving from the USA, Canada or Mexico to another country, the SIM card will need to be reset to properly register on a new country roaming network.

• If you have the OneSimCard Menu on your phone (it may be called Sim Application Menu on iPhones or SIM Toolkit on Androids), go to the menu, scroll down to Settings and enter Service Code 2003 and confirm, then Code 000 and confirm. For older SIM cards after this enter Service Code 1101 and confirm. Turn the phone off and then back on. 
  
  
• If you do not have access to the OneSimCard Menu then turn off your phone, remove the battery for 20 seconds, reinstall the battery and then turn back on your phone.

Some phone models do not allow direct dialing with older OneSimCard SIMs sold before January 1, 2017.

To get around this problem, you should try either of these methods:

• Locate the OneSimCard menu on your phone. (Some phones have it in Applications.)
  Make a call using menu 'Call'.
• You can also make a call by dialing directly *146*00 Country Code Number#
  For example, to make a call to the USA, you would dial *146*0018574440686# (do not forget to hit pound at the end of the number)

* is a star character located on the keypad

Other examples of how to use the *146* dialing prefix if necessary:

• To check your balance dial  *146*099# and press the TALK (or SEND) button
• To add funds dial *146*098XXXX*ZZ# and press the TALK (or SEND) button,
  where XXXX - 4 last digit of your credit card on file, ZZ - Recharge amount
• You need to press * on your phone in the above dialing sequences (it is a star character located on the keypad)
• Activation of voice mail *146*091# and press the TALK (or SEND) button
• Deactivation of voice mail *146*090# and press the TALK (or SEND) button
• Check number of messages in Voice Mail *146*094# and press the TALK (or SEND) button
• To listen to voice mail *146*095# and press the TALK (or SEND) button

The prefix *146* and # at the end can be used from any phone. However, newer OneSimCard SIM do not require it and you should be able to dial codes directly, 091, 094, 095, 099 or 098XXXX*XX Talk.

If you have an older SIM and the dialing does not work without entering *146*, please follow these simple instructions to remove the need to dial *146*:

How to activate compatibility mode:

 

 1. Locate OneSimCard Menu.

 On iPhones it is called SIM Applications menu and is located under Settings- Phone menu

         On Androids it is called SIM Toolkit app and it looks like one of the apps

1. Open "OneSimCard" menu ( SIM Applications, SIM Toolkit, STK)
2. Select "Settings

Newer SIM Cards: Select Compatibility option and make sure "On" is selected

Older SIM Cards: After selecting Settings:

1. Agree with message by pressing "Yes"
2. Dial digits "1101" and select "OK" (Screen will show "CC OptionX: ON" message)

Bear in mind that if you have powered your telephone down, and have removed and reinstalled the battery, you will need to follow the programming steps outlined above, again.

When dialed directly, some Nokia and other phones can display message: "Call is not allowed" or "Call is barred". Just ignore this message and wait for the ring-back for 10 seconds or so.

The  eSIM World, eSIM Asiania, OneSimCard Europe & More and Universal SIM cards do not use the callback to make an outgoing call in over 70 countries.

Currently, the mobile application to remove the callback on other SIM cards is not available.